Technical specs:
1.Work piece width maximum :1500mm;1200mm
2. Coil layers: Typical coil with 1-3 layers of tube (capable to bend 3 layers of Φ9.52 tube or four layers of Φ7 finned tube)
3. Bending R: R85mm
4. Bending angle range is 0-105°which is set by an electric control box.
5. Can bend coils into L/U/G shapes, straight line of the U-shape bottom ≥240mm; Minimal length of the short side of L and U : 230mm(single layer), 270mm(double layer) and 300mm for triple layers.
6. Fin material requirements: hard or semi-hard aluminum material. If in louver pattern,then material should be H24 or H26,and collar height should be less than 2.2mm
7.Working capacity:4kw
8.Power supply: 3 phase 5 wires, AC 380V/50HZ
Performance and Speed:
L shape bending:20 seconds.
U shape bending :45 seconds
G shape bending :65 seconds
Controls
Pneumatic parts use high quality products, default brands:Airtec or Delix
Machine’s "Mitsubishi" PLC system plus a touch screen interface provides you with many options: manual mode, automatic mode, parameter setting, product counting, fault alarm monitoring and other functions. By setting your configuring parameters, you can easily change the product specifications and models.
